Basic Info.
After-sales Service
24 Global Services
Type
Environmental Test Chamber
Product Name
Constant Temperature and Humidity Weighing System
Refrigeration Unit
500×500×1200mm
Temperature Control Range
15 °c ~ 70 °c
Temperature Control Accuracy
± 0.1 °c
Temperature Resolution
0.1 °c
Humidity Range
25 % ~ 80 % R.H
Humidity Fluctuation
± 2 % R.H
Humidity Resolution
0.1 % R.H
Total Installed Power
2.8kw
Average Heating and Cooling Rate
0.7 °c ~ 1.0 °c / Min
Supply Ability
150 Sets/Months
Delivery Time
20 Working Days
Transport Package
Strong Wooden Case
Specification
1445× 725× 1700mm
Product Description
Constant Temperature and Humidity Weighing System
Introduction: KS-FTHW408L is a fully automatic constant temperature and humidity weighing system developed and produced by Kexun Instruments for the automatic balancing and weighing of filter membranes, filter heads and cartridges for sampling of low concentration particulate matter.
It is designed as a left and right split system, with 4 sets of movable wheels at the bottom for easy moving and fixing, and with 5 levels of vibration protection. Equipped with professional grade industrial computer and workstation for automatic reading of balance data, automatic recording and generation of tables and one-touch printing; equipped with fully automatic robotic arm and composite sample tower for automatic sample pick-up and retrieval, with a pre-constant weight of 100 47mm or 90mm membranes, 60 filter heads and 182 cartridges; equipped with membrane code identification system to ensure that each sample is recordable and traceable. (Option)Conformity:1. The performance pointer conforms to the requirements of GB5170, 2, 3, 5, 6 - 95 Electrical and electronic products environmental test equipment basic parameters test methods low temperature, high temperature, constant humidity and heat, alternating humidity and heat test equipment.
2. Basic environmental test procedures for electrical and electronic products Test Ca: constant damp heat test method GB/T2423.3-93 (IEC68-2-3)
3. Basic environmental test procedures for electrical and electronic products Test Da: alternating damp heat test method GB/T2423.4-93 (IEC68-2-30)
4. GJB150.4(MIL-STD-810D) Low temperature test method
5. GB/T5170.2-96 Temperature test equipment
6. GB/T5170.5-96 Humidity and heat test equipment
7. GB10592-93 High and low temperature test chamber technical conditions
GB10586-93 Humid heat test chamber technical conditions
8. Determination of low energy particulate matter in exhaust gases from stationary sources Weight method HJ836-2017
9. HJ-76 Technical requirements and technical specifications for continuous testing of flue gas emissions from stationary sources
10. HJ656 Ambient air particulate matter (PM2.5) manual monitoring method (weight method) technical specifications
11. HJ/T48 Technical conditions for smoke samplers
12. HJ/T373 Technical specifications for quality assurance and quality control of stationary exhaust gas monitoring techniques
13. HJ/T397 Technical specifications for stationary exhaust gas monitoring
14. JJG/1036 Electronic balance
15. GB/T16157 Sampling requirements and sampling methods for gaseous pollutants in the exhaust of stationary sources with low concentration of particulate matterProduct Name and Model Number:Product Name | Constant temperature and humidity weighing system |
Product Model | KS-FTHW408L |
Quantity | 1 set |
Weight | 450KG (approx.) |
Overview:Applications | A high precision balance is placed inside a high precision constant temperature and humidity system, the sample to be weighed is placed inside the system, balanced for 24 hours and then weighed fully automatically. This system overcomes the effects of changes in temperature and humidity in the laboratory environment on the weighing results and improves the accuracy of the weighing. |
Features | The constant temperature and humidity weighing system case comes with its own pulley and self-locking function, which makes it easy to move and fix the whole machine, and the balance works within the system. The sample is balanced in a high precision constant temperature and humidity environment to ensure the accuracy of sample weighing. The system has an automatic alarm function for mechanical faults and an automatic alarm function for lack of water in the water tank. The system is reasonably designed and uses multi-stage anti-vibration measures to ensure that the balance works continuously and smoothly and the readings are stable. The humidifier adopts ultrasonic humidification mode, closed circuit circulation, the condensate generated by dehumidification flows back to the same water supply tank to solve the problem of frequent water refilling. The wind speed inside the chamber does not affect the storage of samples, taking, etc. The constant temperature and humidity adopts the cyclic mode of air supply and suction to ensure uniform temperature and humidity inside the chamber. The observation window is made of double-layer hollow toughened glass, which is transparent, heat-insulating and not easy to produce steam frosting, etc.; silicone gloves are configured to ensure that the temperature and humidity fluctuations in the chamber are in accordance with the standard requirements of HJ836-2017 Determination of low concentration particulate matter in stationary pollution sources by weight during manual operation, and the weighing of the balance is not affected. |
Basic working principle | 1. Heating principle: the heating in the test chamber is mainly the use of high-power PPT pulse heating body, to improve the heating and heating precision, heating more balanced. 2. Refrigeration principle: the refrigeration method of the test chamber is mainly mechanical refrigeration, mechanical refrigeration using compression refrigeration, they are mainly composed of imported compressors, condensers, evaporators, etc. 3. Humidification principle: built-in ultrasonic humidifier humidification atomization. |
Main technical parameters:Dimensions | Inner box size: 1445×725×1700mm (L*W*H) Refrigeration unit: 500×500×1200mm |
Temperature control range | 15ºC~70ºC Arbitrary adjustment (factory setting is 25ºC) |
Temperature control accuracy | ±0.1ºC |
Temperature resolution | 0.1ºC |
Humidity range | 25% to 80% R.H (50±5% R.H relative humidity) (factory setting 50% R.H) |
Temperature control accuracy | ±0.1ºC |
Temperature resolution | 0.1ºC |
Humidity range | 25% to 80% R.H (50±5% R.H relative humidity) (factory setting 50% R.H) |
Humidity fluctuation | ±2% R.H |
Humidity resolution | 0.1% R.H |
Average rate of temperature rise and fall | 0.7ºC~1.0ºC/min |
Total installed power | 2.8kw |
Power requirements | 220V±10%; 50 Hz |
Main configuration:Constant temperature and humidity chamber | 1 set |
Double air duct constant temperature and humidity system (built-in) | 1 set |
Refrigeration unit (external) | 1 set |
Filter membrane placement tower | 2 units |
Anti-vibration sheet metal table | 1 unit |
Ion purging and de-staticising device (built-in) | 1 set |
Industrial control computer and workstation |
Laser printer |
Fully automatic mechanical operating arm |
Main advantages:1. Dual hot and cold air duct design with automatic switchable cold air baffle for more accurate temperature and humidity control.
2. Equipped with filter membrane code identification system to ensure that each sample information can be recorded and tracked.
3. Automatic reading of balance data, automatic table generation, one-touch printing, 24 hours continuous operation (option).
4. Adopting the overall upper plate air inlet and overall lower return air structure, which makes the internal temperature of the chamber more uniform.
5. Adopt imported asynchronous shaded-pole motor, which can automatically stabilize the circulating air flow rate through the motor current.Product Show:Advantage:
Ø 24 hours online
Ø10years experiences
Ø Best price, fast delivery
Ø OEM,ODM
ØGet dozens of national patent technology !
ØThe introduction of advanced production equipment through international certification quality assurance.
ØPerfect after-sales service system, to provide you with professional technical support !
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Company Information:Dongguan Kexun Precision Instrument Co., Ltd.
specializes in research and development, production, sales, repair, maintenance, technical services, equipment import and export and integration companies. Main products, quality department, laboratories, testing centres, universities and colleges laboratory, scientific research units with reliability testing instruments and equipment, high and low temperature humidity and heat test chamber, constant temperature and humidity test chamber, cold and heat shock test chamber, rapid temperature and humidity test chamber, salt spray tester, xenon lamp weathering test chamber, sand and dust test chamber, ultraviolet weathering test chamber, rain test chamber, dust test chamber, aging test chamber, walk-in aging Laboratory, aging room, tensile testing machine, compression testing machine, vibration test bench, plugging and unplugging testing machine, breaking strength testing machine, thrust tester, etc. Products meet the standard! Welcome to consult!
Packaging & Shipping:1. Strong standard wood case, inner plastic films wrapped for high low temperature thermal shock test machine/thermal shock impact test chamber
2. Usually we delivery the equipment by air,by sea or by express. it depends on customer.FAQ 1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
A: Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers.
If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2. What's the delivery term?
A: At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the machine?
A: Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4. How to install and use the product?
A: We will send you operating instructions, English video by Email. Or you can download on our officail website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
Address:
No. 1, Dawo Road, Qingxi Town, Dongguan City, Guangdong Province, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Bags, Cases & Boxes, Computer Products, Electrical & Electronics, Furniture, Industrial Equipment & Components, Instruments & Meters, Lights & Lighting, Manufacturing & Processing Machinery, Service
Management System Certification:
ISO 9001, ISO 9000, ISO 14000
Company Introduction:
Dongguan Kexun Precision Instrument Co., Ltd. is a manufacturer with many years of research and development, design and production of environmental testing machines. It has strong experience and cooperates with well-known domestic and foreign companies. Its products are exported to many countries and regions in the world.
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
Production and marketing, maintenance: Precision instruments, meters and accessories, general machinery and equipment and accessories, intelligent automation systems, software and equipment, hardware products, household appliances, electronic products, environmental protection and energy-saving products, steel, metal materials, motors, motors and accessories, computer peripheral products; Import and export of goods, import and export of technology