Battery Combustion Test Machine
Introduction:
This machine is suitable for testing the flammability of lithium batteries (or battery packs). A 102mm diameter circular hole is drilled in an experimental platform and a wire mesh is placed over the hole. The battery under test is placed on the wire mesh screen and an octagonal aluminium screen is installed around the specimen, then the burner is lit and the specimen is heated until the battery explodes or the battery burns up and the burning process is timed.
Standard:
Δ GB/T 31241-2014 Safety requirements for lithium-ion batteries and battery packs for portable electronic products
Δ UL 1642:2012 Standard for Lithium Batteries
Δ UN38.3 (2012) Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria, Part III
Δ IEC 62133-2012 Safety requirements for batteries and battery packs containing alkaline or non-acidic electrolytes
Technical specifications:
| Model |
KS-6008C |
| Control method |
PLC touch screen control system |
| Inner dimensions |
750x750x500mm (WxDxH) |
| External dimensions |
900x900x1300mm (WxDxH) |
| Inner box material |
SUS201 stainless steel plate, thickness 1.2mm |
| Outer box material |
1.5mm thick cold-rolled steel plate baked finish |
| Observation window |
250x250mm, two layers of toughened glass, transparent window with stainless steel mesh |
| Smoke vent |
Diameter 100mm, located at the rear of the box |
| Pressure relief port |
200x200mm opening, located on the rear side of the chamber, when the specimen explodes, the pressure relief opening pops open to relieve the pressure |
| Chamber door |
Single door with left-hand opening, with safety limit switch and explosion-proof chain on the side, the equipment can only be operated when the door is closed to ensure the safety of personnel. |
| Bunsen burner |
Internal diameter of the orifice is 9.5mm, length approx. 100 mm |
| Burning time |
(0-99H99, switchable H/M/S units) |
| Test round hole diameter |
102mm |
| Test mesh sieve specification |
20 mesh sieve of 0.43mm diameter stainless steel wire woven into a US inch mesh |
| Flame-to-screen height |
38mm |
| Octagonal mesh width |
24″ (610mm) between each side, octagonal in shape, eight sides are movable for easy replacement and removal. |
| Octagonal mesh height |
Aluminium mesh, consisting of 0.25mm diameter aluminium wire woven into a mesh containing 16-18 mesh per inch |
| Combustion gases |
Methane or LPG (customer supplied) |
| Appliance weight |
160kg |
| Machine power supply |
AC220V , 4A, 2KV |
Product Show:
Advantage:
Ø 24 hours online
Ø10years experiences
Ø Best price, fast delivery
Ø OEM,ODM
ØGet dozens of national patent technology !
ØThe introduction of advanced production equipment through international certification quality assurance.
ØPerfect after-sales service system, to provide you with professional technical support !
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Company Information:
Dongguan Kexun Precision Instrument Co., Ltd. specializes in research and development, production, sales, repair, maintenance, technical services, equipment import and export and integration companies. Main products, quality department, laboratories, testing centres, universities and colleges laboratory, scientific research units with reliability testing instruments and equipment, high and low temperature humidity and heat test chamber, constant temperature and humidity test chamber, cold and heat shock test chamber, rapid temperature and humidity test chamber, salt spray tester, xenon lamp weathering test chamber, sand and dust test chamber, ultraviolet weathering test chamber, rain test chamber, dust test chamber, aging test chamber, walk-in aging Laboratory, aging room, tensile testing machine, compression testing machine, vibration test bench, plugging and unplugging testing machine, breaking strength testing machine, thrust tester, etc. Products meet the standard! Welcome to consult!
Packaging & Shipping:
1. Strong standard wood case, inner plastic films wrapped for high low temperature thermal shock test machine/thermal shock impact test chamber
2. Usually we delivery the equipment by air,by sea or by express. it depends on customer.
FAQ
1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
A: Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers.
If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2. What's the delivery term?
A: At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the machine?
A: Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4. How to install and use the product?
A: We will send you operating instructions, English video by Email. Or you can download on our officail website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
Audited Supplier 
){kind=link}
){kind=link}